|Lobe:||4||Flow Rate:||162-578 Lpm|
|Machine Type:||Carbon Steel||Rotory Speed:||121-432rpm|
|Output Power:||36kw||Output Torque:||613 N.m|
6 1/2'' Claw Drill Bit,
36Kw Claw Drill Bit,
Eagle Claw Bit 432 rpm 36Kw
36 Kw 165.1mm 6 1/2”Eagle Claw Hdd Reamer Selection Guide
Standard Sonde Housing With Eagle Claw Drill Bits For HDD Project
Signal rods can be loaded and unloaded on the side or rear.
According to the construction needs of different customers, multi-wiring design is adopted.
The integral drill bit adopts wear-resistant alloy precision casting forming technology.
Drill claw adopts wear-resistant high alloy and wear-resistant welding process.
The signal transmission slot is closed with non-metal, and the signal penetration is strong.
The signal transmission slot is evenly distributed to ensure that the guide drill does not interfere with the transmission signal when rotating.
Design of directional positioning groove, used for directional positioning when the signal rod is loaded once.
Improve the orientation accuracy, the signal resistance is small.
A larger orifice area can increase the flow rate, reduce the pressure of the mud, and obtain better sand returning capacity.
A special buffer is installed in the cavity, the buffer efficiency is higher, the probe is effectively protected from vibration, and the working time of the probe is extended.
|Machine Type||Drilling Tool|
|bit size||3 3/4"(95mm)|
|connected thread||2 7/8''reg|
|flow rate||162-578 lpm|
|working pressure loss||3.2mpa|
|output torque||613 N.m|
|Applicable Industries||Building Material Shops, Machinery Repair Shops, Construction works , Energy & Mining|
|Model||ToolOD mm||Connecting Thread||For Mud motor||IADC|
|6 1/2”||165.1||3 1/2REG||5LZ120x7.0-5-864|
|8 1/2”||215.9||4 1/2REG||5LZ165x7.0-5-840|
|9 1/2”||241.3||6 5/8REG||5LZ172x7.0-5-840|
|10 5/8”||269.9||6 5/8REG||5LZ203x7.0 -5-840|