|Application Rock Formation:||Weathered Rock Drilling||Suitable HDD Drill Rig:||Vermeer, Ditch Witch, Case, American Auger, Etc|
|Size:||108,127,145,165mm Or Customized||Suitable Drill Rod:||60,73,76,83,89mm Or Customized|
Mining Trihawk Drill Bit,
oem Trihawk Trenchless Claw Drill Bit,
oem Trihawk Drill Bit
Stainless Steel Trenchless Drilling Tool Eagle Claw Bit For Mining
High Quality Eagle Claw Tooth Drag Drill Bit For Mining
Perfectly balanced cutting design, smooth and efficient operation.
The cutter teeth can be welded with cemented carbide for maximum durability.
The aggressive three-tooth carbide cutting action passes the most difficult conditions.
The turning surface is conical, which reacts faster to directional thrust.
The drill pipe and rig have little vibration and run smoothly.
The dome carbide provides great abrasion resistance without cutting holes on the top for great steering.
Minimize the possibility of clogging of the built-in check valve.
When it comes to ground eating, high production HDD blades and bits, we supply the most popular rock bit, the Eagle Claw, which has long held drillers hearts for its low wear and long use with carbide teeth that grind through the toughest rock.
It uses three standard conical incisors, and applies its short and fat hard surface in a spiral form around each incisor, so that the teeth have a better bite effect and a longer service life. There is an extra high impact area of cemented carbide lining around the tooth root of each milling cutter to extend the service life.
|Size||108,127,145,165mm or Customized|
|Suitable drill rod||60,73,76,83,89mm or Customized|
|Suitable HDD drill rig||Vermeer, Ditch Witch, Case, American Auger, etc|
|Application rock formation||Weathered rock drilling|
|Drill pipe diameter||≥ 60|
|Applicable Industries||Construction works|
|Machine Type||Drilling Tool|
|Material||Carbon steel, Stainless Steel|
|Use||Horizontal directional drilling|
|Color||Blue or Customized|
|Thread||4 1/2"" IF box and pin|
|Diameter of hole||140mm-180mm|
Eagle Claw can rip through sandstone, shale and cobbles for horizontal directional drilling
Eagle claws can tear sandstone, shale and pebbles.
Quick change of carbide milling cutter teeth and balanced cutting design to improve stability and reduce vibration.
Aggressive tri-tooth carbide cutting action.
Conical-shaped steering face allows for quick reactions to directional pushes.